MAG-A1(Li-ion Negative Material)

IApplication Scope ：

This specification can be applied in the type of SINUO negative pole MAG-A1 Li ion electrode material, and this product can be used in producing the liquid state Li ionbattery of polymer Li ionsoft packing Li ion and cylinder type Li ion battery.

II 、 Product Characters ：

1Big capacity discharging rate 2High efficiency of charging and discharging at first time 3Superior in cycling 4Excellent in keeping low temperature and huge electric current charging 5Safe 6Easy to process

IIIMaterial Type and Model

TypeLi ion Battery Negative Material

ModelMAG-A1

IV 、 Standard

This standard is made according to international standards and our company's technical norms.

V 、 Physical Character

VIParticle Distribution

VII 、 SEM

VIII 、 Electric Chemistry Property

1. Capacity

2. 1C / 0.5C

3. Low temperature property

4 ． Cycle Life

Charge: CC/CV,4.2V, 1C ×2.5hrs Temperature: 25

Discharge: Constant current 1C to 2.75V

VIIII 、 Test Condition

Electric chemical test standard is made according to the GB-T18287-2000 Li battery national standard. The tested maximum No. is affected by the factors of producer's material, manufacture craft, quality control, etc.

Temperature ： 15-35Relative Humidity ： 45%~75% Atmospheric Pressure ： 86kPa~106kPa

X. Packing and Transportation

Packing and Transportation

In order to assure the stable quality of the material, our company uses the water proof materi,al for the inner packing, while the outer packing uses the hard cartons.

The material should be sealed up in cases for transportation, avoid violent shake, lash, compress and prevent the sun and rain, use automobile, train ship, etc.

② Abnormal Material

Don't use the broken package material which is damaged because of force, drop down during transportation if need to use please let us know and we will give you advices to deal with.

XI 、 Preservation

Suggest preserving according to conditions as follows:

Temperature ： 15-40Relative Humidity ： 45%~75% Atmospheric Pressure ： 86kPa~106kPa

XII 、 Things to be paid attention to

In order to prevent material leaking Oxygen, and changing the physical properties, please do precautions as follow:

Warning

To immerse in the sea or water is forbidden. Put in cool and dry place when not use.

To put the material near the fire and heater is forbidden.

Don't deal with the material again using other physical or chemical method.

When the thick liquid is ready, don't place for a long time, place too long should stir again and keep this state when stirring.